| Search | Statistics | User Listing | Forums |
| Mitsubishi 380 Forum -Exclusively for owners of the Australian 380 PS41 -> General 380 related chat -> Technical help request area -> View Thread |
|
| You are logged in as a guest. ( logon Only if you have registered by Email as per the instructions in the forum) |
 TMR380 High Flow Air Intake InstallationJump to page : 1 Now viewing page 1 [10 messages per page] | View previous thread :: View next thread |
| General 380 related chat -> Technical help request area | Message format |
Krisisagemini |
| ||
Posts: 1 Location: Mackay, Queensland | Hi all! Received my TMR380 intake this morning, and was just wondering if anybody has any diagrams or instructions on the correct fitment of this device. I am aware there is some cutting work involved, so was just seeking some guidance on correct techniques so as not to damage anything else. Bit of a greeny at this, sorry! Hope to hear from you soon Kris  | ||
| |||
| Cashie |
| ||
Frequent flyer Bronze Posts: 45   Location: Perth, WA | |||
| |||
| Administrator |
| ||
Frequent flyer Gold Posts: 1093   Location: An island off southern Tasmania. | just undo the two plastic rivets holding the old one on...then wiggle the old one off and it will be obvious what needs to be done. you can pull the front half of the airbox off and do it on the bench if thats easier. just two 10mm bolts hold the airbox on...pretty hard to stuff it up. dont expect any wildly noticeable improvement in anything at all really. just my opinion.... | ||
| |||
| Cashie |
| ||
Frequent flyer Bronze Posts: 45 Location: Perth, WA | Administrator - 2/3/2013 08:42 just undo the two plastic rivets holding the old one on...then wiggle the old one off and it will be obvious what needs to be done. you can pull the front half of the airbox off and do it on the bench if thats easier. just two 10mm bolts hold the airbox on...pretty hard to stuff it up. dont expect any wildly noticeable improvement in anything at all really. just my opinion.... Agree, I noticed no difference with mine, just looks a bit better under the bonnet. | ||
| |||
| Jump to page : 1 Now viewing page 1 [10 messages per page] |
| Search this forum Printer friendly version E-mail a link to this thread |
| (Delete all cookies set by this site) | |
