Search | Statistics | User Listing Forums
Mitsubishi 380 Forum -Exclusively for owners of the Australian 380 PS41
Mitsubishi 380 Forum -Exclusively for owners of the Australian 380 PS41 ->  Technical info for the 380 -> 380 exhaust -> View Thread

You are logged in as a guest. ( logon Only if you have registered by Email as per the instructions in the forum)

Berklee Muffler
Jump to page : 1
Now viewing page 1 [10 messages per page]
View previous thread :: View next thread
   Technical info for the 380 -> 380 exhaustMessage format
 
VRXBurst
Posted 2/2/2012 00:57 (#14011)
Subject: Berklee Muffler





Posts: 11
55
Just chasing an opinion on the Breklee muffler that all the Magna boys off AMC reckon to put on the 380, any thoughts, Ideally I would like a dual exhaust setup on the car, Would it be worth getting a couple of these berklee things or just using a couple of stock mufflers
Top of the page Bottom of the page
VRXBurst
Posted 2/2/2012 09:16 (#14014 - in reply to #14011)
Subject: Re: Berklee Muffler





Posts: 11
55
And does anyone know where I can get a stock muffler and tip as well as a
Top of the page Bottom of the page
wsbtt
Posted 2/2/2012 18:17 (#14019 - in reply to #14014)
Subject: Re: Berklee Muffler



Frequent flyer Gold

Posts: 421
1001001001005555
Location: Brisbane,qld
I was told by a guy who helped engineer the TMR that when he put two straight throughs on his TMR he got no power increase, i think they were berklee's , suppose it depends on what you want, a loud car or a reasonably quiet one, ive had loud exhausts on all my cars and the TMR is the first quiet one and i love it, heaps of grunt with no noise ( except for the supercharger whine) doesnt attract too much attention
Top of the page Bottom of the page
Administrator
Posted 2/2/2012 20:50 (#14021 - in reply to #14011)
Subject: Re: Berklee Muffler



Frequent flyer Gold

Posts: 1093
10005025555
Location: An island off southern Tasmania.
The TMR380 uses two stock mufflers.

I got my 2nd one off a wreck, total cost was $300 inc fitting.

In my opinion it is the best setup.

see elsewhere in this forum for the pictures.

get them from the wreckers....cheapest and best ADR compliant solution there is.


look here....http://forum.380db.com/forum/forums/thread-view.asp?tid=1343&posts=13&start=1
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [10 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Registered to: www.380DB.com
(Delete all cookies set by this site)