Viewing a thread

Mitsubishi 380 Forum -Exclusively for owners of the Australian 380 PS41 -> Technical info for the 380 -> 6G75 section -> View Thread

You are logged in as a guest. ( logon Only if you have registered by Email as per the instructions in the forum)

Tips Jump to page : 1 Now viewing page 1 [10 messages per page]	View previous thread :: View next thread
Technical info for the 380 -> 6G75 section	Message format

Perry

Posted 5/12/2012 21:52 (#14633)
Subject: Tips

Frequent flyer Bronze

Posts: 41

Hey all,

So I have finally acquired a 75 with 22000ks on it, now are there any hints and tips on stripping it down for the rebuild?

Administrator

Posted 6/12/2012 11:43 (#14635 - in reply to #14633)
Subject: RE: Tips

Frequent flyer Gold

Posts: 1093
1000

Location: An island off southern Tasmania.

Perry - 5/12/2012 21:52

Hey all,

So I have finally acquired a 75 with 22000ks on it, now are there any hints and tips on stripping it down for the rebuild?

its pretty straight forward...can change an entire motor single handedly in a day now...and still be on the phone working in between.

put the magna sump on...it has better lower chambers for hard cornering re- oil flow.

put iridiums all round, use the stainless steel manifold gaskets from the 380 they are reusable as are the head gaskets.

put the 380 knock sensor mount and block in while you have the chance..for later on.

wsbtt

Posted 23/1/2013 15:16 (#14791 - in reply to #14633)
Subject: Re: Tips