Frequent flyer Gold
Posts: 1093
   
Location: An island off southern Tasmania. | By fitting a switch to pin 21 on the SMT6 connector to ground you can invoke an alternate tuning map.
Pin 21 is the grey wire with black trace located directly next to the brown wire with black trace.
The tuning software will recognize when the pin is grounded and will allow you to load or edit a different map setting.
I adapted mine so when I switch the LPG off and run petrol only it goes into performance mode instead of economy mode.
On a TMR380 the SMT6 is fitted under the dashboard above the left side of the glovebox.
It is usually secured with just a cable tie, (and can be a source of rattle.) |
SMT6-switching tune maps on the fly
