Search | Statistics | User Listing Forums
Mitsubishi 380 Forum -Exclusively for owners of the Australian 380 PS41
Mitsubishi 380 Forum -Exclusively for owners of the Australian 380 PS41 ->  Technical info for the 380 -> Sprintex,SMT6,etc -> View Thread

You are logged in as a guest. ( logon Only if you have registered by Email as per the instructions in the forum)

supercharger changeout
Jump to page : 1 2
Now viewing page 2 [10 messages per page]		View previous thread :: View next thread
   Technical info for the 380 -> Sprintex,SMT6,etcMessage format
 
wsbtt
Posted 14/2/2013 22:43 (#14884 - in reply to #14882)
Subject: Re: supercharger changeout



Frequent flyer Gold

Posts: 421
1001001001005555
Location: Brisbane,qld
Administrator - 14/2/2013 21:48

I have done it 4 times now, practice makes perfect.


the most time consuming bit is wiring in the ecu....and I didn't do any of that.


undo plenum, remove engine mount, undo 4 bolts holding blower on, undo fuel line, intake and thats it.


half a dozen plenum bolts and it just pops off with the plenum.


10mm, 12mm, 14mm and 17mm sockets required.

Yeah this was Zupps here in brissie, they prolly havent seen one b 4
Top of the page Bottom of the page
Jump to page : 1 2
Now viewing page 2 [10 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Registered to: www.380DB.com
(Delete all cookies set by this site)