Frequent flyer Gold
Posts: 1092
   
Location: An island off southern Tasmania. | Don't get raped by dealers for a replacement key.
This one is proven by me to work....and includes the transponder.
Far better quality than other flip keys too.
BUT...you need to short out pins 2 and 4 on the OBD plug.
If you short the wrong pins...bye bye ECU...get it right!
So I used an old OBD2 plug cut off from an old loom....but Jaycar can sell you a new one.
so do the pins.
Then insert key into ignition ... dont run motor.
press hazard switch 6 times...thats on three times then off three times.
doors will lock and unlock.
then press lock on key until doors lock again.
remove OBD pins short/plug whichever way you did it...
finished....key is programmed
 (380 key ebay.jpg)
Attachments
----------------
 380 key ebay.jpg (183KB - 417 downloads)
|