TMR380 High Flow Air Intake Installation
Krisisagemini
Posted 1/3/2013 09:56 (#14959)
Subject: TMR380 High Flow Air Intake Installation





Posts: 1

Location: Mackay, Queensland		Hi all!

Received my TMR380 intake this morning, and was just wondering if anybody has any diagrams or instructions on the correct fitment of this device. I am aware there is some cutting work involved, so was just seeking some guidance on correct techniques so as not to damage anything else.

Bit of a greeny at this, sorry!

Hope to hear from you soon

Kris
Top of the page Bottom of the page
Cashie
Posted 2/3/2013 10:43 (#14961 - in reply to #14959)
Subject: Re: TMR380 High Flow Air Intake Installation



Frequent flyer Bronze

Posts: 45
255555
Location: Perth, WA		Just cut the existing box to the lip you will see on it.
I just used a flat and round file to do mine.. Took no time.
Top of the page Bottom of the page
Administrator
Posted 2/3/2013 11:42 (#14964 - in reply to #14959)
Subject: Re: TMR380 High Flow Air Intake Installation



Frequent flyer Gold

Posts: 1093
10005025555
Location: An island off southern Tasmania.		just undo the two plastic rivets holding the old one on...then wiggle the old one off and it will be obvious what needs to be done.

you can pull the front half of the airbox off and do it on the bench if thats easier.

just two 10mm bolts hold the airbox on...pretty hard to stuff it up.


dont expect any wildly noticeable improvement in anything at all really.


just my opinion....
Top of the page Bottom of the page
Cashie
Posted 5/3/2013 15:55 (#14965 - in reply to #14964)
Subject: Re: TMR380 High Flow Air Intake Installation



Frequent flyer Bronze

Posts: 45
255555
Location: Perth, WA
Administrator - 2/3/2013 08:42

just undo the two plastic rivets holding the old one on...then wiggle the old one off and it will be obvious what needs to be done.

you can pull the front half of the airbox off and do it on the bench if thats easier.

just two 10mm bolts hold the airbox on...pretty hard to stuff it up.


dont expect any wildly noticeable improvement in anything at all really.


just my opinion....


Agree, I noticed no difference with mine, just looks a bit better under the bonnet.
Top of the page Bottom of the page